feature(neon): since nixos-hardware was added, add support for the t14g1 as well

Reviewed-on: #85

INSTALLATION.md

@@ -2,8 +2,13 @@
 
 - The installations presented in this repository are always luks encrypted
 - For simplicity I'm using device labels rather than uuids
+- Secure Boot has to be disabled in the firmware, the installer iso isn't signed
 
-1. the partitioning layout should look somewhat like this after the installation
+1. create the partitions with `cfdisk` or `fdisk` (gpt)
+   - `nvme0n1p1`: 2G, type `EFI System`, otherwise the firmware won't find the bootloader
+   - `nvme0n1p2`: the rest, type `Linux filesystem`
+
+   the layout should look somewhat like this after the installation
 ```bash
 NAME               MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINTS
 nvme0n1            259:0    0 476.9G  0 disk
@@ -30,12 +35,13 @@ cryptsetup luksOpen /dev/nvme0n1p2 cryptroot
 pvcreate /dev/mapper/cryptroot
 # create a volume group inside
 vgcreate lvmroot /dev/mapper/cryptroot
-# create the swap volume
+# create the swap volume, half the ram (no hibernation)
-lvcreate --size 8G lvmroot --name swap
+lvcreate --size 16G lvmroot --name swap
 # if you desire, create a home volume
 lvcreate --size 150G lvmroot --name home
-# create the root volume
+# create the root volume, leave some space in the vg to grow volumes later
-lvcreate -l 100%FREE lvmroot --name root
+# (lvextend -r -L +50G lvmroot/home works while mounted)
+lvcreate -l 90%FREE lvmroot --name root
 
 # format as usual for root partition
 mkfs.ext4 -L "nixroot" /dev/mapper/lvmroot-root
@@ -47,7 +53,7 @@ mkswap -L "nixswap" /dev/mapper/lvmroot-swap
 # mount root
 mount /dev/disk/by-label/nixroot /mnt
 # mount boot
-mount --mkdir /dev/nvme0n1p1 /mnt/boot
+mount --mkdir /dev/disk/by-label/nixboot /mnt/boot
 # again, if you did the home volume
 mount --mkdir /dev/disk/by-label/nixhome /mnt/home
 # turn on swap
@@ -59,8 +65,7 @@ swapon /dev/disk/by-label/nixswap
 # generate templates and update the hardware-configuration.nix
 nixos-generate-config --root /mnt
 
-# add dm-crypt and dm-mod to the kernelModules
+# no extra kernelModules needed, luks and lvm load dm_crypt and dm_mod themselves
-boot.initrd.kernelModules = [ "dm-crypt" "dm-mod" ];
 
 # add file systems using labels
 fileSystems."/" =
@@ -81,7 +86,13 @@ swapDevices =
   ];
 
 # point the bootloader to the luks device
-boot.initrd.luks.devices."cryptroot".device = "/dev/disk/by-label/nixcrypt";
+boot.initrd.luks.devices."cryptroot" = {
+  device = "/dev/disk/by-label/nixcrypt";
+  # without this fstrim never reaches the ssd
+  allowDiscards = true;
+  # lower latency on nvme
+  bypassWorkqueues = true;
+};
 ```
 
 4. install nixos

README.md

@@ -6,20 +6,20 @@ My personal NixOS configurations.
 
 ```bash
 .
-├── flake.lock
+├── flake.nix # hosts and home-manager wiring
-├── flake.nix # flake definition
 ├── hosts
-│   └── neon
+│   ├── argon # desktop
-│       ├── configuration.nix # import nix-modules for specific host
+│   ├── neon # laptop
-│       └── hardware-configuration.nix # hardware configs for specific host
+│   └── default # test vm
+│       ├── configuration.nix # host-specific settings and module imports
+│       ├── hardware-configuration.nix # generated by nixos-generate-config
+│       └── niri.nix # host-specific niri settings (outputs, input)
 ├── modules
-│   ├── home-manager
+│   ├── home-manager # user modules, imported by users/aaron/home.nix
-│   │   ├── xyz_module.nix
+│   └── nixos # system modules, imported by the hosts
-│   └── nixos
-│       └── xyz_module.nix
 └── users
     └── aaron
-        └── home.nix # import home-manager modules for specific user
+        └── home.nix # imports home-manager modules
 ```
 
 ## installation

flake.lock

@@ -41,6 +41,26 @@
         "type": "github"
       }
     },
+    "nixos-hardware": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1790948122,
+        "narHash": "sha256-fDMYyzY1lI5b8RuCMrvoaIgTeRwNnTG4dNk1ucROlQE=",
+        "owner": "NixOS",
+        "repo": "nixos-hardware",
+        "rev": "0953bb1a609df63013176e3463393f8df993d3ef",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "repo": "nixos-hardware",
+        "type": "github"
+      }
+    },
     "nixpkgs": {
       "locked": {
         "lastModified": 1790689126,
@@ -102,6 +122,7 @@
     "root": {
       "inputs": {
         "home-manager": "home-manager",
+        "nixos-hardware": "nixos-hardware",
         "nixpkgs": "nixpkgs",
         "nixvim": "nixvim",
         "noctalia": "noctalia"

flake.nix

@@ -11,6 +11,10 @@
       url = "github:noctalia-dev/noctalia-shell";
       inputs.nixpkgs.follows = "nixpkgs";
     };
+    nixos-hardware = {
+      url = "github:NixOS/nixos-hardware";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
     nixvim = {
       url = "github:nix-community/nixvim";
       inputs.nixpkgs.follows = "nixpkgs";
@@ -35,6 +39,9 @@
             ./hosts/${hostName}/configuration.nix
             home-manager.nixosModules.home-manager
             {
+              home-manager.useGlobalPkgs = true;
+              home-manager.useUserPackages = true;
+              home-manager.backupCommand = "mv -f {file} {file}.hm-bak-$(date +%Y%m%d%H%M%S)";
               home-manager.extraSpecialArgs = { inherit inputs; };
               home-manager.users.aaron.imports = [
                 nixvim.homeModules.nixvim
@@ -49,6 +56,7 @@
         default = mkHost "default";
         neon = mkHost "neon";
         argon = mkHost "argon";
+        krypton = mkHost "krypton";
       };
     };
 }

hosts/argon/configuration.nix

@@ -1,15 +1,25 @@
+# argon: desktop with an amd gpu and three luks-encrypted data drives.
+# The drives are unlocked in the initrd with keyfiles from /etc/nixos/keys.
+
+{ lib, pkgs, ... }:
+
+let
+  # luks name -> partition uuid, mounted at /mnt/<name>
+  drives = {
+    data1 = "dfae62cc-bad1-4879-bf9a-461bde833625";
+    data2 = "8312edae-9247-481b-a313-52a7f848f027";
+    nvmecache = "2352250e-4ebe-4f9a-bf66-0d4aaa961bd8";
+  };
+  key = name: "/etc/nixos/keys/${name}.key";
+in
 {
   imports = [
     ../../modules/nixos/appimage.nix
     ../../modules/nixos/astro.nix
     ../../modules/nixos/audio.nix
     ../../modules/nixos/bootloader.nix
-    ../../modules/nixos/calibre.nix
     ../../modules/nixos/certificates.nix
-    ../../modules/nixos/claudecode.nix
-    ../../modules/nixos/drives.nix
     ../../modules/nixos/gnupg.nix
-    ../../modules/nixos/graphics.nix
     ../../modules/nixos/greetd.nix
     ../../modules/nixos/locales.nix
     ../../modules/nixos/networking.nix
@@ -29,9 +39,35 @@
   # host-specific niri config (outputs, input devices)
   home-manager.users.aaron.imports = [ ./niri.nix ];
 
-  # set hostname
+  # amd gpu: mesa/vulkan, and amdgpu in the initrd for plymouth
-  networking.hostName = "argon";
+  hardware.graphics = {
+    enable = true;
+    enable32Bit = true;
+  };
+  hardware.amdgpu.initrd.enable = true;
 
-  # install state version
+  # encrypted data drives
-  system.stateVersion = "25.11"; # Don't change
+  boot.initrd.secrets = lib.mapAttrs' (name: _: lib.nameValuePair (key name) (key name)) drives;
+  boot.initrd.luks.devices = lib.mapAttrs (name: uuid: {
+    device = "/dev/disk/by-uuid/${uuid}";
+    keyFile = key name;
+    # trim for ssds, ignored by drives without discard support
+    allowDiscards = true;
+  }) drives;
+  fileSystems = lib.mapAttrs' (
+    name: _:
+    lib.nameValuePair "/mnt/${name}" {
+      device = "/dev/mapper/${name}";
+      fsType = "ext4";
+      options = [ "nofail" ];
+    }
+  ) drives;
+
+  environment.systemPackages = with pkgs; [
+    amdgpu_top
+    calibre # ebook management and kobo syncing
+  ];
+
+  networking.hostName = "argon";
+  system.stateVersion = "25.11"; # don't change
 }

hosts/argon/hardware-configuration.nix

@@ -22,18 +22,21 @@
     "usb_storage"
     "sd_mod"
   ];
-  boot.initrd.kernelModules = [ "dm-crypt dm-mod" ];
+  boot.initrd.luks.devices."cryptroot" = {
-  boot.initrd.luks.devices."cryptroot".device = "/dev/disk/by-label/nixcrypt";
+    device = "/dev/disk/by-label/nixcrypt";
+    allowDiscards = true;
+    bypassWorkqueues = true;
+  };
   boot.kernelModules = [ ];
   boot.extraModulePackages = [ ];
 
   fileSystems."/" = {
-    device = "/dev/mapper/lvmroot-root";
+    device = "/dev/disk/by-label/nixroot";
     fsType = "ext4";
   };
 
   fileSystems."/boot" = {
-    device = "/dev/disk/by-uuid/AC1C-20EB";
+    device = "/dev/disk/by-label/nixboot";
     fsType = "vfat";
     options = [
       "fmask=0022"
@@ -42,12 +45,12 @@
   };
 
   fileSystems."/home" = {
-    device = "/dev/mapper/lvmroot-home";
+    device = "/dev/disk/by-label/nixhome";
     fsType = "ext4";
   };
 
   swapDevices = [
-    { device = "/dev/mapper/lvmroot-swap"; }
+    { device = "/dev/disk/by-label/nixswap"; }
   ];
 
   nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";

hosts/argon/niri.nix

@@ -1,4 +1,5 @@
 # argon: desktop with two 1440p monitors side by side
+
 {
   wayland.windowManager.niri.settings = {
     input = {

hosts/default/configuration.nix

@@ -1,4 +1,4 @@
-# 0x29a nixos conifg
+# 0x29a nixos config
 
 { pkgs, ... }:
 

hosts/krypton/configuration.nix

@@ -0,0 +1,35 @@
+# krypton: framework 13 pro, intel core ultra x7 358H
+
+{ inputs, ... }:
+
+{
+  imports = [
+    inputs.nixos-hardware.nixosModules.framework-intel-core-ultra-series3
+    ../../modules/nixos/appimage.nix
+    ../../modules/nixos/astro.nix
+    ../../modules/nixos/audio.nix
+    ../../modules/nixos/bootloader.nix
+    ../../modules/nixos/certificates.nix
+    ../../modules/nixos/docker.nix
+    ../../modules/nixos/gnupg.nix
+    ../../modules/nixos/locales.nix
+    ../../modules/nixos/networking.nix
+    ../../modules/nixos/niri.nix
+    ../../modules/nixos/noctalia.nix
+    ../../modules/nixos/openssh.nix
+    ../../modules/nixos/packages.nix
+    ../../modules/nixos/protonvpn.nix
+    ../../modules/nixos/sddm.nix
+    ../../modules/nixos/services.nix
+    ../../modules/nixos/settings.nix
+    ../../modules/nixos/steam.nix
+    ../../modules/nixos/users.nix
+    ../../modules/nixos/vial.nix
+  ];
+
+  # host-specific niri config (input devices, laptop binds)
+  home-manager.users.aaron.imports = [ ./niri.nix ];
+
+  networking.hostName = "krypton";
+  system.stateVersion = "26.05"; # don't change
+}

hosts/krypton/hardware-configuration.nix

@@ -0,0 +1,60 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{
+  config,
+  lib,
+  pkgs,
+  modulesPath,
+  ...
+}:
+
+{
+  imports = [
+    (modulesPath + "/installer/scan/not-detected.nix")
+  ];
+
+  boot.initrd.availableKernelModules = [
+    "xhci_pci"
+    "thunderbolt"
+    "nvme"
+    "usb_storage"
+    "sd_mod"
+  ];
+  boot.initrd.kernelModules = [ "dm-snapshot" ];
+  boot.initrd.luks.devices."cryptroot" = {
+    device = "/dev/disk/by-label/nixcrypt";
+    allowDiscards = true;
+    bypassWorkqueues = true;
+  };
+
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" = {
+    device = "/dev/disk/by-label/nixroot";
+    fsType = "ext4";
+  };
+
+  fileSystems."/boot" = {
+    device = "/dev/disk/by-label/nixboot";
+    fsType = "vfat";
+    options = [
+      "fmask=0022"
+      "dmask=0022"
+    ];
+  };
+
+  fileSystems."/home" = {
+    device = "/dev/disk/by-label/nixhome";
+    fsType = "ext4";
+  };
+
+  swapDevices = [
+    { device = "/dev/disk/by-label/nixswap"; }
+  ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+  hardware.cpu.intel.npu.enable = true;
+}

hosts/krypton/niri.nix

@@ -0,0 +1,24 @@
+# krypton: framework 13 laptop, the built-in display is auto-configured by niri
+
+{ lib, ... }:
+
+{
+  wayland.windowManager.niri.settings = {
+    input.touchpad = {
+      tap = { };
+      natural-scroll = { };
+    };
+
+    layout.gaps = lib.mkForce 10;
+
+    binds = {
+      "Print".screenshot = { };
+      "Ctrl+Print".screenshot-screen = { };
+      "Mod+Shift+P".power-off-monitors = { };
+
+      # finer brightness steps
+      "XF86MonBrightnessUp".spawn-sh = lib.mkForce "brightnessctl --class=backlight set +1%";
+      "XF86MonBrightnessDown".spawn-sh = lib.mkForce "brightnessctl --class=backlight set 1%-";
+    };
+  };
+}

hosts/neon/configuration.nix

@@ -1,11 +1,15 @@
+# neon: thinkpad t14 gen1 (intel)
+
+{ inputs, ... }:
+
 {
   imports = [
+    inputs.nixos-hardware.nixosModules.lenovo-thinkpad-t14-intel-gen1
     ../../modules/nixos/appimage.nix
     ../../modules/nixos/astro.nix
     ../../modules/nixos/audio.nix
     ../../modules/nixos/bootloader.nix
     ../../modules/nixos/certificates.nix
-    ../../modules/nixos/claudecode.nix
     ../../modules/nixos/docker.nix
     ../../modules/nixos/gnupg.nix
     ../../modules/nixos/locales.nix
@@ -26,9 +30,6 @@
   # host-specific niri config (input devices, laptop binds)
   home-manager.users.aaron.imports = [ ./niri.nix ];
 
-  # set hostname
   networking.hostName = "neon";
-
+  system.stateVersion = "25.11"; # don't change
-  # install state version
-  system.stateVersion = "25.11"; # Don't change
 }

hosts/neon/hardware-configuration.nix

@@ -25,7 +25,11 @@
     "dm-snapshot"
     "cryptd"
   ];
-  boot.initrd.luks.devices."cryptroot".device = "/dev/disk/by-label/nixcrypt";
+  boot.initrd.luks.devices."cryptroot" = {
+    device = "/dev/disk/by-label/nixcrypt";
+    allowDiscards = true;
+    bypassWorkqueues = true;
+  };
 
   boot.kernelModules = [ "kvm-intel" ];
   boot.extraModulePackages = [ ];

hosts/neon/niri.nix

@@ -1,17 +1,7 @@
-# neon: laptop, built-in display is auto-configured by niri
+# neon: laptop, the built-in display is auto-configured by niri
+
 { lib, ... }:
 
-let
-  brightness = step: {
-    _props.allow-when-locked = true;
-    spawn = [
-      "brightnessctl"
-      "--class=backlight"
-      "set"
-      step
-    ];
-  };
-in
 {
   wayland.windowManager.niri.settings = {
     input.touchpad = {
@@ -26,9 +16,9 @@ in
       "Ctrl+Print".screenshot-screen = { };
       "Mod+Shift+P".power-off-monitors = { };
 
-      # finer brightness steps; mkForce, since spawn lists would otherwise be concatenated
+      # finer brightness steps
-      "XF86MonBrightnessUp" = lib.mkForce (brightness "+1%");
+      "XF86MonBrightnessUp".spawn-sh = lib.mkForce "brightnessctl --class=backlight set +1%";
-      "XF86MonBrightnessDown" = lib.mkForce (brightness "1%-");
+      "XF86MonBrightnessDown".spawn-sh = lib.mkForce "brightnessctl --class=backlight set 1%-";
     };
   };
 }

modules/home-manager/git.nix

@@ -1,3 +1,7 @@
+# Commits are signed with each machine's ~/.ssh/id_ed25519 through the ssh
+# agent. gitea verifies them against the account keys; allowed_signers gives
+# the local git the same trust, so `git log --show-signature` resolves too.
+
 {
   config,
   lib,
@@ -7,18 +11,12 @@
 
 let
   email = "aaron@0x29a.ch";
-
-  # public half of every machine's ~/.ssh/id_ed25519, each one verified as a
-  # signing key in gitea. the key a host signs with is picked up from the key
-  # file itself, this list only tells the local git which machines to trust
   signingKeys = [
     "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHRhwzo1oxaT3fEySSmILKNnu9v30cfjx5G7FKpmfqeX aaron@argon"
     "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGDkhvvTUcBSQdtXjX+Mw2Bp8HHhtiBm8aJi4ZxiBgZR aaron@neon"
   ];
 in
 {
-  # gitea verifies signatures against the account keys, this teaches the local
-  # git the same trust so `git log --show-signature` resolves as well
   xdg.configFile."git/allowed_signers".text = lib.concatMapStrings (
     key: "${email} ${key}\n"
   ) signingKeys;
@@ -26,9 +24,7 @@ in
   programs.git = {
     enable = true;
     settings = {
-      push = {
+      push.autoSetupRemote = true;
-        autoSetupRemote = true;
-      };
       user = {
         name = "aaron";
         inherit email;
@@ -37,8 +33,7 @@ in
     };
     signing = {
       format = "ssh";
-      # point at the *public* key so ssh-keygen signs through the ssh agent
+      # the public key makes ssh-keygen sign through the agent
-      # instead of reading the passphrase protected private key from disk
       key = "${config.home.homeDirectory}/.ssh/id_ed25519.pub";
       signer = "${pkgs.openssh}/bin/ssh-keygen";
       signByDefault = true;

modules/home-manager/niri.nix

@@ -1,7 +1,11 @@
+# Only renders ~/.config/niri/config.kdl; niri itself, its session and portals
+# come from modules/nixos/niri.nix. Outputs and input devices that differ
+# per machine live in hosts/<host>/niri.nix.
+
 { lib, osConfig, ... }:
 
 let
-  # Mod+1..9 focus a workspace, Mod+Ctrl+1..9 move the column there.
+  # Mod+1..9 focus a workspace, Mod+Ctrl+1..9 move the column there
   workspaceBinds = lib.mergeAttrsList (
     map (n: {
       "Mod+${toString n}".focus-workspace = n;
@@ -9,24 +13,18 @@ let
     }) (lib.range 1 9)
   );
 
-  # Shorthand for binds that only run spawn-sh while allowed on the lock screen.
+  # shell command that also works on the lock screen
   lockedSh = cmd: {
     _props.allow-when-locked = true;
     spawn-sh = cmd;
   };
 in
 {
-  # Niri config, rendered to ~/.config/niri/config.kdl by home-manager's built-in
-  # wayland.windowManager.niri module. The compositor itself, its session, systemd
-  # units and portals are provided by the NixOS module (modules/nixos/niri.nix), so
-  # this module only writes the config. Host-specific outputs and input devices
-  # live in hosts/<host>/niri.nix.
-
   wayland.windowManager.niri = {
-    # only on hosts that run niri (see modules/nixos/niri.nix)
+    # only on hosts that run niri
     enable = osConfig.programs.niri.enable;
 
-    # Use the system's niri so the config is validated against the running version.
+    # validate the config against the installed niri
     package = osConfig.programs.niri.package;
     systemd.enable = false;
     portalPackage = null;
@@ -125,21 +123,11 @@ in
         };
         "Mod+D" = {
           _props.hotkey-overlay-title = "Run an Application";
-          spawn = [
+          spawn-sh = "noctalia msg panel-toggle launcher";
-            "noctalia"
-            "msg"
-            "panel-toggle"
-            "launcher"
-          ];
         };
         "Super+Alt+L" = {
           _props.hotkey-overlay-title = "Lock the Screen";
-          spawn = [
+          spawn-sh = "noctalia msg session lock";
-            "noctalia"
-            "msg"
-            "session"
-            "lock"
-          ];
         };
 
         # media keys (PipeWire / WirePlumber)
@@ -151,24 +139,8 @@ in
         "XF86AudioStop" = lockedSh "playerctl stop";
         "XF86AudioPrev" = lockedSh "playerctl previous";
         "XF86AudioNext" = lockedSh "playerctl next";
-        "XF86MonBrightnessUp" = {
+        "XF86MonBrightnessUp" = lockedSh "brightnessctl --class=backlight set +10%";
-          _props.allow-when-locked = true;
+        "XF86MonBrightnessDown" = lockedSh "brightnessctl --class=backlight set 10%-";
-          spawn = [
-            "brightnessctl"
-            "--class=backlight"
-            "set"
-            "+10%"
-          ];
-        };
-        "XF86MonBrightnessDown" = {
-          _props.allow-when-locked = true;
-          spawn = [
-            "brightnessctl"
-            "--class=backlight"
-            "set"
-            "10%-"
-          ];
-        };
 
         "Mod+O" = {
           _props.repeat = false;

modules/home-manager/nixvim.nix

@@ -4,10 +4,7 @@
   programs.nixvim = {
     enable = true;
 
-    # We keep `inputs.nixvim.inputs.nixpkgs.follows = "nixpkgs"` in flake.nix so
+    # same nixpkgs as the flake's `follows`, silences nixvim's pin warning
-    # the whole config shares a single nixpkgs. Setting `source` explicitly to
-    # that same nixpkgs acknowledges the override and silences nixvim's warning
-    # about its pinned nixpkgs being bypassed.
     nixpkgs.source = inputs.nixpkgs;
 
     # set aliases
@@ -104,8 +101,6 @@
     };
   };
 
-  # install dependencies
+  # telescope live_grep
-  home.packages = with pkgs; [
+  home.packages = [ pkgs.ripgrep ];
-    ripgrep
-  ];
 }

modules/home-manager/noctalia.nix

@@ -24,15 +24,18 @@
 
       # general
       shell = {
-        font_family = "0xProto Nerd Font Mono";
+        font_family = "0xProto Nerd Font";
-        ui_scale = 1.2;
         avatar_path = "/home/aaron/syncthing/pictures/Logo-Aaron-Totenkopf-rund-schwarz.png";
         telemetry_enabled = false;
         clipboard_enabled = true;
         password_style = "random";
 
+        launcher = {
+          categories = false;
+          providers.emoji.global = false;
+        };
+
         panel = {
-          launcher_compact = true;
           open_near_click_control_center = true;
           open_near_click_session = true;
           open_near_click_wallpaper = true;
@@ -97,7 +100,7 @@
         bluetooth.capsule = true;
         control-center = {
           capsule_radius = 8;
-          custom_image = "/home/aaron/Pictures/nix_flake_logo.png";
+          custom_image = "/home/aaron/syncthing/pictures/nix_flake_logo.png";
           scale = 1.4;
         };
         cpu.capsule = true;
@@ -116,6 +119,7 @@
 
       # idle behavior
       idle = {
+        pre_action_fade_seconds = 5;
         behavior_order = [
           "screen-off"
           "lock"
@@ -123,14 +127,17 @@
         ];
         behavior = {
           "screen-off" = {
+            action = "screen_off";
+            enabled = true;
+            timeout = 300;
+          };
+          "lock" = {
+            action = "lock";
             enabled = true;
             timeout = 600;
           };
-          "lock" = {
-            enabled = true;
-            timeout = 660;
-          };
           "lock-and-suspend" = {
+            action = "lock_and_suspend";
             enabled = true;
             timeout = 1800;
           };

modules/home-manager/shell.nix

@@ -1,25 +1,26 @@
+# zsh with oh-my-zsh: agnoster where glyphs render, gentoo on the console.
+# Deep paths are shortened to `…/last/two` so the prompt stays on one line:
+# `%(4~|…/%2~|%~)` shows the last two components from four levels down.
+
 { lib, ... }:
 
 {
-  # configure z-shell to use omz with some plugins
   programs.zsh = {
     enable = true;
     autosuggestion.enable = true;
     syntaxHighlighting.enable = true;
     oh-my-zsh = {
       enable = true;
-      # add git and agents as plugins
       plugins = [
         "git"
         "ssh-agent"
         "gpg-agent"
       ];
-      # everything here lands before `source $ZSH/oh-my-zsh.sh`
+      # runs before oh-my-zsh is sourced
       extraConfig = ''
-        # make omz faster on large repositories
+        # faster git status on large repositories
         DISABLE_UNTRACKED_FILES_DIRTY=true
 
-        # only display a fancy theme when glyphs are rendered
         if [[ "$TERM" == "linux" || "$TERM" == "screen" ]]; then
           ZSH_THEME="gentoo"
         else
@@ -28,37 +29,20 @@
       '';
     };
 
-    # Unlike oh-my-zsh.extraConfig above, this lands *after*
+    # runs after oh-my-zsh, once the theme's prompt exists
-    # `source $ZSH/oh-my-zsh.sh`, which is where the theme's prompt functions
-    # come into existence.
     initContent = lib.mkAfter ''
-      # Keep the prompt on one line in deeply nested trees.
-      #
-      # Both themes render the working directory as `%~`, the full path with
-      # $HOME collapsed to `~`. Somewhere like
-      # ~/git/bfh/cas-pml-sem/documents/bericht that is 39 columns on its own,
-      # and together with user@host and a long branch name the line wraps.
-      #
-      # `%(4~|…/%2~|%~)` is a prompt ternary: at four or more components show
-      # an ellipsis and the last two, otherwise show the path whole. Short
-      # paths like ~/git/nixconfig are left alone.
       if [[ "$ZSH_THEME" == "agnoster" ]]; then
-        # agnoster calls prompt_dir on every render, so redefining it is
+        # agnoster renders prompt_dir on every prompt, so override it
-        # enough. AGNOSTER_DIR_* keep the segment's own colours.
         prompt_dir() {
           prompt_segment "$AGNOSTER_DIR_BG" "$AGNOSTER_DIR_FG" '%(4~|…/%2~|%~)'
         }
       else
-        # gentoo builds PROMPT once at load time, so patch the string. Its
+        # gentoo builds PROMPT once; ascii dots, the console font lacks …
-        # `%~` is the non-root branch of `%(!.%1~.%~)`, and it is the first
-        # literal `%~` in there, so the root branch is untouched. ASCII `...`
-        # because this branch is the Linux console, whose font may lack U+2026.
         PROMPT="''${PROMPT/\%~/%(4~|.../%2~|%~)}"
       fi
     '';
   };
 
-  # set important env vars
   home.sessionVariables = {
     EDITOR = "vim";
     NH_FLAKE = "/home/aaron/git/nixconfig";

modules/home-manager/styling.nix

@@ -1,7 +1,6 @@
 { pkgs, ... }:
 
 {
-  # set gtk theme
   gtk = {
     enable = true;
     theme = {
@@ -13,7 +12,6 @@
     gtk4.extraConfig.gtk-application-prefer-dark-theme = 1;
   };
 
-  # set qt theme
   qt = {
     enable = true;
     platformTheme.name = "qt6";
@@ -22,10 +20,4 @@
       package = pkgs.adwaita-qt;
     };
   };
-
-  # ensure packages are installed
-  home.packages = with pkgs; [
-    gnome-themes-extra
-    adwaita-qt
-  ];
 }

modules/home-manager/tmux.nix

@@ -1,54 +1,37 @@
+# Nord-style status line built natively, no theme plugin.
+# The powerline separators (U+E0B0..U+E0B3) are written as escapes via
+# fromJSON: literal private-use glyphs get stripped silently on copy/paste.
+# Commas inside #{?...} separate arguments, hence the escaped `#,` below.
+
 let
-  # Powerline separators, U+E0B0..U+E0B3.
-  #
-  # Written as escapes rather than literal glyphs. These are Private Use Area
-  # codepoints: they render only with a patched font, they survive copy/paste
-  # badly, and when they get stripped the loss is invisible, the config still
-  # parses, the status bar just quietly loses its separators. Nix has no \u
-  # escape of its own, but fromJSON does.
   sep = builtins.fromJSON ''
     {
-      "right":     "\ue0b0",
+      "right":     "",
-      "rightThin": "\ue0b1",
+      "rightThin": "",
-      "left":      "\ue0b2",
+      "left":      "",
-      "leftThin":  "\ue0b3"
+      "leftThin":  ""
     }
   '';
 in
 {
   programs.tmux = {
-    # defaults
     enable = true;
     prefix = "C-a";
     keyMode = "vi";
     mouse = true;
-
+    terminal = "tmux-256color"; # truecolor, italics and undercurl in nvim
-    # tmux-256color gives truecolor, italics and undercurl in nvim.
+    escapeTime = 10; # the 500ms default lags leaving insert mode in nvim
-    terminal = "tmux-256color";
+    focusEvents = true; # nvim autoread
-
-    # Default is 500ms. Causes lag you feel when leaving insert mode in nvim,
-    # because tmux is waiting to see whether Esc starts an escape sequence.
-    escapeTime = 10;
-
-    # nvim autoread / :checktime react to focus.
-    focusEvents = true;
-
-    # History limit.
     historyLimit = 50000;
-
+    baseIndex = 1; # window numbers match the number row
-    # Window numbers matching the number row.
-    baseIndex = 1;
 
     extraConfig = ''
-      # Status keys
       set -g status-keys vi
 
-      # Tell tmux the outer terminal can do 24-bit colour (tmux >= 3.2).
+      # outer terminal does 24-bit colour
       set -sa terminal-features ",*:RGB"
 
-      # Shift+Enter / extended keys
+      # forward Shift+Enter and other extended keys as CSI-u (tmux >= 3.5)
-      # These make tmux forward CSI-u sequences unconditionally.
-      # Needs tmux >= 3.5 for the format option,
       set -s extended-keys always
       set -s extended-keys-format csi-u
       set -as terminal-features '*:extkeys'
@@ -88,27 +71,18 @@ in
       bind -r K resize-pane -U 5
       bind -r L resize-pane -R 5
 
-      # Wayland clipboard integration
+      # copy to both the clipboard and primary selection
-      # Copy selection to both clipboard (Ctrl+V / Shift+Insert) and primary (middle-click)
       bind -T copy-mode-vi v send-keys -X begin-selection
       bind -T copy-mode-vi C-v send-keys -X rectangle-toggle
       bind -T copy-mode-vi y send-keys -X copy-pipe-and-cancel "wl-copy && wl-copy --primary"
       bind -T copy-mode-vi Enter send-keys -X copy-pipe-and-cancel "wl-copy && wl-copy --primary"
       bind -T copy-mode-vi MouseDragEnd1Pane send-keys -X copy-pipe-and-cancel "wl-copy && wl-copy --primary"
-      # Uncomment if you want yanks to also travel over SSH via OSC52.
-      # Locally redundant with wl-copy above.
-      #set -g set-clipboard on
 
       # Kill commands
       bind q confirm-before -p "kill window #W? (y/n)" kill-window
       bind Q confirm-before -p "kill session #S? (y/n)" kill-session
 
       # Bars
-      # This is the nord-tmux status line. #{prefix_highlight} came from that
-      # theme's tmux-prefix-highlight integration -- a plugin you never loaded,
-      # so the token expanded to nothing. tmux can do it natively. Commas inside
-      # #{?...} are argument separators and have to be escaped as #, hence the
-      # look of the style spec.
       set -g status-left-length 24
       set -g status-left "#[fg=black,bg=blue,bold] #{=20:session_name} #[fg=blue,bg=black,nobold,noitalics,nounderscore]${sep.right}"
       set -g status-right "#{?client_prefix,#[fg=black#,bg=yellow#,bold] ^A ,}#[fg=brightblack,bg=black,nobold,noitalics,nounderscore]${sep.left}#[fg=white,bg=brightblack] %Y-%m-%d #[fg=white,bg=brightblack,nobold,noitalics,nounderscore]${sep.leftThin}#[fg=white,bg=brightblack] %H:%M #[fg=cyan,bg=brightblack,nobold,noitalics,nounderscore]${sep.left}#[fg=black,bg=cyan,bold] #H "

modules/nixos/appimage.nix

@@ -1,17 +1,10 @@
+# Running an AppImage directly fails on NixOS: its runtime dlopens
+# libfuse.so.2, which nix-ld doesn't cover. appimage-run unpacks the image
+# into an FHS sandbox instead. Used for the BitBox02 wallet from bitbox.swiss.
+
 {
-  # AppImages ship a squashfs payload that the bundled runtime mounts through
-  # libfuse.so.2 at startup. nix-ld resolves the ELF interpreter but not that
-  # dlopen, so running one directly dies with "dlopen(): error loading
-  # libfuse.so.2". appimage-run sidesteps the mount entirely: it unpacks the
-  # image and runs the payload inside an FHS sandbox, which the bundled Qt and
-  # electron style binaries need anyway.
-  #
-  # Used for the BitBox02 wallet AppImage, downloaded fresh from
-  # https://bitbox.swiss/download/ rather than installed from nixpkgs.
   programs.appimage = {
     enable = true;
-    # register AppImages with binfmt_misc so ./Something.AppImage runs as-is,
+    binfmt = true; # ./Something.AppImage runs without the appimage-run prefix
-    # no appimage-run prefix to remember.
-    binfmt = true;
   };
 }

modules/nixos/astro.nix

@@ -1,37 +1,23 @@
+# Stellarium for target finding, Siril for stacking.
+#
+# Siril's python plugins run in a venv of foreign manylinux wheels (numpy,
+# PyQt6, ...), dlopened by nixpkgs python, so nix-ld doesn't help. The wrapper
+# puts their libs on LD_LIBRARY_PATH, a python on PATH to bootstrap the venv,
+# and adwaita-qt6 on QT_PLUGIN_PATH so the dark style override resolves.
+# The python comes from /etc/siril/bin, a stable symlink: a /nix/store path
+# would leave the venv dangling after the next python bump and gc.
+#
+# StarNet++ has no package: unzip the v2 ORT cli build from starnetastro.com
+# to ~/.local/share/siril/starnet/ and point Siril's preferences at ./starnet2.
+# It runs through nix-ld and finds its own libs in the bundled ./lib.
+
 { lib, pkgs, ... }:
 
 let
-  # Siril's Python plugins (sirilpy) run in a venv that pip-installs foreign
-  # manylinux wheels (numpy, GraXpert deps, ...). Those .so files need
-  # libstdc++ at runtime. nix-ld does NOT cover this: it only handles the
-  # initial exec of a foreign binary, but here a *native* nixpkgs python
-  # dlopen()s the foreign wheel. So we put the libs on LD_LIBRARY_PATH, which
-  # the python subprocess inherits from the Siril process.
   sirilWithPlugins = pkgs.symlinkJoin {
     name = "siril-with-plugins";
     paths = [ pkgs.siril ];
     nativeBuildInputs = [ pkgs.makeWrapper ];
-    # Siril bootstraps its sirilpy venv at first run by locating a `python3`
-    # on PATH. nixpkgs only *propagates* python3 from the siril derivation (it
-    # isn't on the runtime PATH), so without the --prefix PATH below the GUI
-    # fails with "Python not found in system PATH" and never creates
-    # ~/.local/share/siril/venv.
-    #
-    # We deliberately do NOT put ${pkgs.python3}/bin on PATH directly: `venv`
-    # symlinks bin/python3 to whatever sys.executable was, so the venv would
-    # hard-link a /nix/store hash that gets garbage-collected after the next
-    # python bump, leaving a dangling symlink ("Error finding venv python
-    # path, unable to spawn python"). Instead we go through the stable
-    # /etc/siril/bin/python3 symlink (see environment.etc below), which NixOS
-    # re-points at the current python on every rebuild.
-    #
-    # The VeraLux PyQt6 wheel ships only the built-in Windows/Fusion styles, so
-    # the global QT_STYLE_OVERRIDE=adwaita-dark (inherited from the session) is
-    # rejected ("invalid style override") and windows fall back to a light
-    # theme. We expose nixpkgs adwaita-qt6's style plugin on QT_PLUGIN_PATH so
-    # the override resolves. This works because nixpkgs qt6 and the bundled Qt
-    # share a major.minor (6.11); if they ever drift the plugin is simply
-    # ignored again (harmless warning + Fusion fallback, no loss of function).
     postBuild = ''
       wrapProgram $out/bin/siril \
         --prefix PATH : /etc/siril/bin \
@@ -40,21 +26,19 @@ let
           lib.makeLibraryPath (
             with pkgs;
             [
-              stdenv.cc.cc.lib # libstdc++ / libgcc_s / libgomp  (numpy etc.)
+              stdenv.cc.cc.lib # libstdc++, libgcc_s, libgomp (numpy)
               zlib
-              zstd # libzstd.so.1                     (PyQt6)
+              zstd # PyQt6
-              libGL # libGL.so.1                       (PyQt6)
+              libGL # PyQt6
-              # PyQt6 (VeraLux) — Qt bundles xcb support so it needs these even
+              # Qt needs these even on wayland
-              # on Wayland; libxkbcommon is the keymap lib used by Wayland too.
               glib
               fontconfig
               freetype
               dbus
               libxkbcommon
-              # Qt platform plugins: the wayland plugin (libqwayland.so) needs the
+              # Qt platform plugins: wayland, and the xcb fallback
-              # wayland client libs; the xcb fallback needs libxcb-cursor.so.0.
+              wayland
-              wayland # libwayland-client/cursor/egl       (wayland plugin)
+              libxcb-cursor
-              libxcb-cursor # libxcb-cursor.so.0                 (xcb plugin)
               libx11
               libxcb
               libxcb-util
@@ -69,27 +53,20 @@ let
   };
 in
 {
-  # install stellarium for target finding and siril for stacking
+  environment.systemPackages = [
-  environment.systemPackages = with pkgs; [
+    pkgs.stellarium
-    stellarium
     sirilWithPlugins
   ];
 
-  # Stable, GC-safe interpreter path for Siril's venv (see sirilWithPlugins).
+  # same python siril propagates, so sirilpy's abi matches
-  # Same python as siril itself propagates, so sirilpy's ABI matches.
   environment.etc."siril/bin/python3".source = "${pkgs.python3}/bin/python3";
 
-  # StarNet++ has no nixpkgs package. Download the StarNet v2 ORT CLI build
+  # for StarNet++
-  # (starnet2_linux_*_ORT_x64_cli) from https://www.starnetastro.com/download/
+  programs.nix-ld = {
-  # and unzip it to ~/.local/share/siril/starnet/. Then in Siril set
+    enable = true;
-  #   Preferences -> Miscellaneous -> StarNet executable
+    libraries = with pkgs; [
-  # to the extracted ./starnet2 binary.
+      stdenv.cc.cc.lib
-  #
-  # The binary is a generic dynamically-linked ELF, so NixOS needs nix-ld to
-  # run it. Its own opencv/onnxruntime libs are found via the bundled ./lib.
-  programs.nix-ld.enable = true;
-  programs.nix-ld.libraries = with pkgs; [
-    stdenv.cc.cc.lib # libstdc++ / libgcc_s
       zlib
     ];
+  };
 }

modules/nixos/bootloader.nix

@@ -24,6 +24,12 @@
   boot.kernelPackages = pkgs.linuxPackages_latest;
   boot.consoleLogLevel = 2;
 
+  # /tmp in RAM, nix builds go to /var/tmp instead (see settings.nix)
+  boot.tmp = {
+    useTmpfs = true;
+    tmpfsSize = "50%";
+  };
+
   # Add boot-related packages
   environment.systemPackages = with pkgs; [
     efibootmgr

modules/nixos/calibre.nix

@@ -1,8 +0,0 @@
-{ pkgs, ... }:
-
-{
-  # install calibre for ebook management and kobo syncing
-  environment.systemPackages = with pkgs; [
-    calibre
-  ];
-}

modules/nixos/claudecode.nix

@@ -1,7 +0,0 @@
-{ pkgs, ... }:
-
-{
-  environment.systemPackages = with pkgs; [
-    claude-code
-  ];
-}

modules/nixos/docker.nix

@@ -1,12 +1,8 @@
-{ pkgs, ... }:
-
 {
-  # add docker group to user
+  # rootless only: no root daemon and no root-equivalent docker group
-  users.users.aaron.extraGroups = [ "docker" ];
+  virtualisation.docker.rootless = {
-
-  virtualisation.docker = {
     enable = true;
-    # Customize Docker daemon settings
+    setSocketVariable = true;
     daemon.settings = {
       dns = [
         "1.1.1.1"
@@ -14,16 +10,6 @@
       ];
       log-driver = "journald";
       registry-mirrors = [ "https://mirror.gcr.io" ];
-      storage-driver = "overlay2";
     };
-    # Use the rootless mode
-    rootless = {
-      enable = true;
-      setSocketVariable = true;
-    };
-    # Install docker-compose
-    extraPackages = with pkgs; [
-      docker-compose
-    ];
   };
 }

modules/nixos/drives.nix

@@ -1,45 +0,0 @@
-# Add encrypted drives to argon
-
-{
-  # copy keyfiles into initrd to make them available during early boot
-  boot.initrd.secrets = {
-    "/etc/nixos/keys/data1.key" = "/etc/nixos/keys/data1.key";
-    "/etc/nixos/keys/data2.key" = "/etc/nixos/keys/data2.key";
-    "/etc/nixos/keys/nvmecache.key" = "/etc/nixos/keys/nvmecache.key";
-  };
-
-  # decrypt data drives with keyfiles for argon
-  boot.initrd.luks.devices = {
-    "data1" = {
-      device = "/dev/disk/by-uuid/dfae62cc-bad1-4879-bf9a-461bde833625";
-      keyFile = "/etc/nixos/keys/data1.key";
-    };
-    "data2" = {
-      device = "/dev/disk/by-uuid/8312edae-9247-481b-a313-52a7f848f027";
-      keyFile = "/etc/nixos/keys/data2.key";
-    };
-    "nvmecache" = {
-      device = "/dev/disk/by-uuid/2352250e-4ebe-4f9a-bf66-0d4aaa961bd8";
-      keyFile = "/etc/nixos/keys/nvmecache.key";
-    };
-  };
-
-  # mount decrypted filesystems
-  fileSystems."/mnt/data1" = {
-    device = "/dev/mapper/data1";
-    fsType = "ext4";
-    options = [ "nofail" ];
-  };
-
-  fileSystems."/mnt/data2" = {
-    device = "/dev/mapper/data2";
-    fsType = "ext4";
-    options = [ "nofail" ];
-  };
-
-  fileSystems."/mnt/nvmecache" = {
-    device = "/dev/mapper/nvmecache";
-    fsType = "ext4";
-    options = [ "nofail" ];
-  };
-}

modules/nixos/gnupg.nix

@@ -1,29 +1,24 @@
+# A graphical pinentry never grabs the tty, so a passphrase prompt can't take
+# over a terminal driven by a coding agent. The cache lasts a working day, and
+# an unattended signature fails after two minutes instead of blocking forever.
+
 { config, pkgs, ... }:
 
 {
-  # enable gnupg agent
   programs.gnupg.agent = {
     enable = true;
-    # a graphical pinentry never grabs the tty, so a passphrase prompt can no
-    # longer take over a terminal that a coding agent is driving
     pinentryPackage = pkgs.pinentry-qt;
     settings = {
-      # keep the key unlocked for a full working day instead of 10 minutes,
-      # so signing commits asks at most once per session
       default-cache-ttl = 86400;
       max-cache-ttl = 86400;
-      # fail an unattended signature instead of blocking on a prompt forever
       pinentry-timeout = 120;
     };
   };
 
-  environment.systemPackages = with pkgs; [
+  environment.systemPackages = [
-    gnupg
+    pkgs.pinentry-curses # fallback for sessions without a display
-    pinentry-qt
-    # fallback for sessions without a display, switch pinentryPackage to use it
-    pinentry-curses
     # prime the passphrase cache on demand, e.g. before an agent session
-    (writeShellScriptBin "gpg-unlock" ''
+    (pkgs.writeShellScriptBin "gpg-unlock" ''
       echo | ${config.programs.gnupg.package}/bin/gpg --clearsign --output /dev/null
       echo "gpg key unlocked"
     '')

modules/nixos/gnuradio.nix

@@ -1,12 +0,0 @@
-{ pkgs, ... }:
-
-{
-  # install gnuradio companion along with it's osmocom library
-  environment.systemPackages = with pkgs; [
-    (gnuradio.override {
-      extraPackages = with gnuradio.pkgs; [ osmosdr ];
-    })
-    gqrx
-    hackrf
-  ];
-}

modules/nixos/graphics.nix

@@ -1,17 +0,0 @@
-{ pkgs, ... }:
-
-{
-  # enable amd GPU acceleration (mesa, vulkan, egl)
-  hardware.graphics = {
-    enable = true;
-    enable32Bit = true;
-  };
-
-  # install amdgpu_top
-  environment.systemPackages = with pkgs; [
-    amdgpu_top
-  ];
-
-  # add amdgpu to the initrd for plymouth
-  hardware.amdgpu.initrd.enable = true;
-}

modules/nixos/networking.nix

@@ -1,20 +1,12 @@
 { pkgs, ... }:
 
 {
-  # user networkmanager
   networking.networkmanager.enable = true;
 
-  # firewall default configs
+  # wifi firmware and bluetooth
-  networking.firewall.allowedTCPPorts = [ ];
-  networking.firewall.allowedUDPPorts = [ ];
-
-  # enable wifi firmware
   hardware.enableAllFirmware = true;
-
-  # enable bluetooth
   hardware.bluetooth.enable = true;
 
-  # Add network-related packages
   environment.systemPackages = with pkgs; [
     wireguard-tools
     update-systemd-resolved

modules/nixos/niri.nix

@@ -1,11 +1,7 @@
 { pkgs, ... }:
 
 {
-  # just enable and install niri
+  # compositor and session; the config itself lives in home-manager
   programs.niri.enable = true;
-
+  environment.systemPackages = [ pkgs.xwayland-satellite ];
-  # Add compositor-related packages
-  environment.systemPackages = with pkgs; [
-    xwayland-satellite
-  ];
 }

modules/nixos/noctalia.nix

@@ -1,14 +1,14 @@
-{ pkgs, inputs, ... }:
+{ pkgs, ... }:
+
 {
-  # install noctalia and helper packages
+  # helpers for the noctalia shell (the shell itself comes from home-manager)
   environment.systemPackages = with pkgs; [
-    inputs.noctalia.packages.${pkgs.stdenv.hostPlatform.system}.default
     adw-gtk3
-    adwaita-qt
     adwaita-qt6
     brightnessctl
     ddcutil
     playerctl
+    wl-clipboard
     wl-mirror
   ];
 }

modules/nixos/packages.nix

@@ -1,10 +1,11 @@
 { pkgs, ... }:
 
 {
-  # system packages
+  # baseline tools for every host
   environment.systemPackages = with pkgs; [
     btop
     cifs-utils
+    claude-code
     cowsay
     dnsutils
     ethtool
@@ -14,31 +15,25 @@
     imv
     iperf3
     jq
-    kdePackages.qtmultimedia
     ldns
     lm_sensors
     lsof
     mtr
-    neovim
     nfs-utils
     nh
     nix-output-monitor
     nmap
-    nvd
     p7zip
     pciutils
     socat
-    sof-firmware
     strace
     sysstat
     tree
     unzip
     usbutils
-    vial
     vim
     wget
     which
-    wl-clipboard
     xz
     zip
     zstd

modules/nixos/protonvpn.nix

@@ -1,13 +1,8 @@
 { pkgs, ... }:
 
 {
-  # protonvpn uses wireguard tunnels, which break strict reverse path filtering
+  # wireguard replies may leave on another interface, so strict rpfilter drops them
-  # because packets arrive on the tunnel interface but may be routed back differently.
-  # "loose" checks that the source is routable through *any* interface (not necessarily
-  # the same one), which is sufficient for wireguard while still preventing IP spoofing.
   networking.firewall.checkReversePath = "loose";
 
-  environment.systemPackages = with pkgs; [
+  environment.systemPackages = [ pkgs.proton-vpn ];
-    proton-vpn
-  ];
 }

modules/nixos/sddm.nix

@@ -1,25 +1,15 @@
 { pkgs, ... }:
 
 {
-  # enable sddm and use astronaut theme
   services.displayManager.sddm = {
     enable = true;
     wayland.enable = true;
     autoNumlock = true;
     enableHidpi = true;
     theme = "sddm-astronaut-theme";
-    settings = {
+    extraPackages = [ pkgs.sddm-astronaut ]; # theme's qml dependencies
-      Theme = {
-        Current = "sddm-astronaut-theme";
-      };
-    };
-    extraPackages = with pkgs; [
-      sddm-astronaut
-    ];
   };
 
-  # Make the theme available in the system path so sddm can find it
+  # sddm looks for themes in the system path
-  environment.systemPackages = with pkgs; [
+  environment.systemPackages = [ pkgs.sddm-astronaut ];
-    sddm-astronaut
-  ];
 }

modules/nixos/settings.nix

@@ -1,31 +1,25 @@
 {
   nix = {
-    # nix settings
     settings = {
-      # enable flakes and nix-command
       experimental-features = [
         "nix-command"
         "flakes"
       ];
-      # auto-optimize my nix-store
       auto-optimise-store = true;
-      # use all cores
+      # parallel builds, each using all cores
       max-jobs = "auto";
-      # use all available cores per job
       cores = 0;
-      # add trusted substituters (binary caches)
+      # cache.nixos.org is the default, these come on top
-      substituters = [
+      extra-substituters = [ "https://nix-community.cachix.org" ];
-        "https://cache.nixos.org"
+      extra-trusted-public-keys = [
-        "https://nix-community.cachix.org"
-      ];
-      # add keys
-      trusted-public-keys = [
-        "cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY="
         "nix-community.cachix.org-1:mB9FSh9qf2dCimDSUo8Zy7bkq5CX+/rkCWyvRCYg3Fs="
       ];
+      trusted-users = [
+        "root"
+        "@wheel"
+      ];
     };
 
-    # enable automatic garbage collection
     gc = {
       automatic = true;
       dates = "weekly";
@@ -33,20 +27,12 @@
     };
   };
 
-  # add trusted users (able to modify the nix store)
+  # build on disk, big builds would fill the /tmp tmpfs
-  nix.settings.trusted-users = [
+  systemd.services.nix-daemon.environment.TMPDIR = "/var/tmp";
-    "root"
-    "@wheel"
-  ];
 
-  # allow unfree packages (steam, protonvpn, discord, etc.)
+  # steam, protonvpn, discord, etc.
   nixpkgs.config.allowUnfree = true;
 
   # links /libexec from derivations to /run/current-system/sw
   environment.pathsToLink = [ "/libexec" ];
-
-  # enable home-manager globally
-  home-manager.useGlobalPkgs = true;
-  home-manager.useUserPackages = true;
-  home-manager.backupCommand = "mv -f {file} {file}.hm-bak-$(date +%Y%m%d%H%M%S)";
 }

modules/nixos/steam.nix

@@ -1,20 +1,13 @@
 { pkgs, ... }:
 
 {
-  # enable steam and open firewall
   programs.steam = {
     enable = true;
+    # fix black screen when running under xwayland-satellite
+    package = pkgs.steam.override { extraArgs = "-system-composer"; };
     remotePlay.openFirewall = true;
     dedicatedServer.openFirewall = true;
     localNetworkGameTransfers.openFirewall = true;
-    # add proton-glorious-eggroll
+    extraCompatPackages = [ pkgs.proton-ge-bin ];
-    extraCompatPackages = with pkgs; [
-      proton-ge-bin
-    ];
-  };
-
-  # fix black screen in steam when using xwayland-satellite
-  programs.steam.package = pkgs.steam.override {
-    extraArgs = "-system-composer";
   };
 }

modules/nixos/thunar.nix

@@ -1,14 +1,9 @@
 { pkgs, ... }:
 
 {
-  # Enable Thunar
   programs.thunar.enable = true;
 
-  # Install Tumbler thumbnailer service
+  # thumbnails: tumbler service plus the path it loads extensions from
-  environment.systemPackages = with pkgs; [
+  environment.systemPackages = [ pkgs.tumbler ];
-    tumbler
-  ];
-
-  # Ensure Thunar can locate the thumbnailer extensions
   environment.pathsToLink = [ "share/thumbnailers" ];
 }

modules/nixos/users.nix

@@ -1,10 +1,8 @@
 { pkgs, ... }:
 
 {
-  # create users
   users.users.aaron = {
     isNormalUser = true;
-    group = "users";
     extraGroups = [
       "wheel"
       "networkmanager"
@@ -13,10 +11,6 @@
     shell = pkgs.zsh;
   };
 
-  # add default zsh config
+  # login shell; plugins and prompt are configured in home-manager
-  programs.zsh = {
+  programs.zsh.enable = true;
-    enable = true;
-    enableCompletion = true;
-    autosuggestions.enable = true;
-  };
 }

modules/nixos/vial.nix

@@ -1,26 +1,21 @@
+# Vial keyboards (lily58 pro r2g) expose a raw HID interface that vial.rocks
+# drives over WebHID; its /dev/hidraw* node is root-only by default.
+# The rule ships as 60-vial.rules because uaccess is only applied by
+# 73-seat-late.rules, and services.udev.extraRules lands at 99, too late.
+
 { pkgs, ... }:
 
 {
-  # Vial-capable keyboards (lily58 pro r2g) expose a second, non-keyboard raw
-  # HID interface that vial.rocks drives over WebHID. Its /dev/hidraw* node is
-  # root-only by default, so neither chromium nor the native app can open it.
-  #
-  # This has to ship as a numbered rules file rather than via
-  # services.udev.extraRules: extraRules lands in 99-local.rules, but the
-  # builtin that turns TAG+="uaccess" into an actual ACL is invoked from
-  # systemd's 73-seat-late.rules. A tag set at 99 is set too late to be seen,
-  # so the device ends up correctly tagged and still unreadable. 60- sorts
-  # safely ahead of 73.
   services.udev.packages = [
     (pkgs.writeTextFile {
       name = "vial-udev-rules";
       destination = "/lib/udev/rules.d/60-vial.rules";
-      # Vial firmware advertises itself through a magic USB serial, so this
+      # the magic serial matches any vial board; uaccess grants the seat owner
-      # matches any vial board rather than just the lily58. uaccess hands the
-      # device to whoever owns the active seat, no group membership needed.
       text = ''
         KERNEL=="hidraw*", SUBSYSTEM=="hidraw", ATTRS{serial}=="*vial:f64c2b3c*", TAG+="uaccess"
       '';
     })
   ];
+
+  environment.systemPackages = [ pkgs.vial ];
 }