chore(update): update flake file

Reviewed-on: #25

INSTALLATION.md

@@ -4,7 +4,6 @@
 - For simplicity I'm using device labels rather than uuids
 
 1. the partitioning layout should look somewhat like this after the installation
-
 ```bash
 NAME               MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINTS
 nvme0n1            259:0    0 476.9G  0 disk
@@ -13,25 +12,26 @@ nvme0n1            259:0    0 476.9G  0 disk
   └─cryptroot      254:0    0 474.9G  0 crypt
     ├─lvmroot-swap 254:1    0    20G  0 lvm   [SWAP]
     ├─lvmroot-home 254:2    0   250G  0 lvm   /home
-    └─lvmroot-root 254:3    0 204.9G  0 lvm   /nix/store
+    └─lvmroot-root 254:3    0 204.9G  0 lvm   /
 ```
 
-2. prepare the installation
+> Note: `lsblk` may additionally show `/nix/store` as a mountpoint on `lvmroot-root`. This is not a separate partition. NixOS mounts the root device a second time at `/nix/store` with `ro,nosuid,nodev` flags to enforce store immutability at runtime.
 
+2. prepare the installation
 ```bash
 # format the boot partition
-mkfs.fat -F 32 /dev/sda1 -n "nixboot"
+mkfs.fat -F 32 /dev/nvme0n1p1 -n "nixboot"
 # create an encrypted partition
-cryptsetup luksFormat -y --label="nixcrypt" /dev/sda2
+cryptsetup luksFormat -y --label="nixcrypt" /dev/nvme0n1p2
 # open the encrypted partition and map it to /dev/mapper/cryptroot
-cryptsetup luksOpen /dev/sda2 cryptroot
+cryptsetup luksOpen /dev/nvme0n1p2 cryptroot
 
 # create the physical volume
 pvcreate /dev/mapper/cryptroot
 # create a volume group inside
 vgcreate lvmroot /dev/mapper/cryptroot
 # create the swap volume
-lvcreate --size 8G lvmroot --name nwap
+lvcreate --size 8G lvmroot --name swap
 # if you desire, create a home volume
 lvcreate --size 150G lvmroot --name home
 # create the root volume
@@ -47,7 +47,7 @@ mkswap -L "nixswap" /dev/mapper/lvmroot-swap
 # mount root
 mount /dev/disk/by-label/nixroot /mnt
 # mount boot
-mount --mkdir /dev/sda1 /mnt/boot
+mount --mkdir /dev/nvme0n1p1 /mnt/boot
 # again, if you did the home volume
 mount --mkdir /dev/disk/by-label/nixhome /mnt/home
 # turn on swap
@@ -55,13 +55,12 @@ swapon /dev/disk/by-label/nixswap
 ```
 
 3. prepare nixos
-
 ```bash
 # generate templates and update the hardware-configuration.nix
-sudo nixos-generate-config --root /mnt
+nixos-generate-config --root /mnt
 
-# add cryptd to the kernelModules
+# add dm-crypt and dm-mod to the kernelModules
-boot.initrd.kernelModules = [ "dm-snapshot" "cryptd" ];
+boot.initrd.kernelModules = [ "dm-crypt" "dm-mod" ];
 
 # add file systems using labels
 fileSystems."/" =
@@ -86,25 +85,20 @@ boot.initrd.luks.devices."cryptroot".device = "/dev/disk/by-label/nixcrypt";
 ```
 
 4. install nixos
-
 ```bash
-cd /mnt
+nixos-install
-sudo nixos-install
 ```
 
-## how to deploy the inital config
+## how to deploy the initial config
-
 - Don't forget to install the bootloader, if you changed it since `nixos-install`
-
 ```bash
 $ sudo nixos-rebuild --install-bootloader switch --flake .#host_name
 ```
 
 ## how to upgrade the system
-
 ```bash
 $ cd /path/to/repo
-$ sudo nix flake update
+$ nix flake update
 $ sudo nixos-rebuild switch --flake .#host_name
 $ sudo nix-collect-garbage
 ```
@@ -114,7 +108,6 @@ $ sudo nix-collect-garbage
 The tool nix-helper is installed by this configuration. It simplifies administrating nixos and adds more output to the rebuild command. It also features a diff after a successful build. The command uses the `NH_FLAKE` environment variable to be able to run from whatever directory.
 
 Basic commands with a set `NH_FLAKE` variable are:
-
 ```bash
 $ nh os switch
 $ nh os build

flake.lock

@@ -28,11 +28,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1770491427,
+        "lastModified": 1772807318,
-        "narHash": "sha256-8b+0vixdqGnIIcgsPhjdX7EGPdzcVQqYxF+ujjex654=",
+        "narHash": "sha256-Qjw6ILt8cb2HQQpCmWNLMZZ63wEo1KjTQt+1BcQBr7k=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "cbd8a72e5fe6af19d40e2741dc440d9227836860",
+        "rev": "daa2c221320809f5514edde74d0ad0193ad54ed8",
         "type": "github"
       },
       "original": {
@@ -43,11 +43,11 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1770197578,
+        "lastModified": 1772624091,
-        "narHash": "sha256-AYqlWrX09+HvGs8zM6ebZ1pwUqjkfpnv8mewYwAo+iM=",
+        "narHash": "sha256-QKyJ0QGWBn6r0invrMAK8dmJoBYWoOWy7lN+UHzW1jc=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "00c21e4c93d963c50d4c0c89bfa84ed6e0694df2",
+        "rev": "80bdc1e5ce51f56b19791b52b2901187931f5353",
         "type": "github"
       },
       "original": {
@@ -66,11 +66,11 @@
         "systems": "systems"
       },
       "locked": {
-        "lastModified": 1770388595,
+        "lastModified": 1772402258,
-        "narHash": "sha256-0NvpmDqFcJAtRFJE3RDZWnN7PDJBZutoDtN+Cl8a3DY=",
+        "narHash": "sha256-3DmCFOdmbkFML1/G9gj8Wb+rCCZFPOQtNoMCpqOF8SA=",
         "owner": "nix-community",
         "repo": "nixvim",
-        "rev": "51abc532525e486176f9a7b24b17908c60017b54",
+        "rev": "21ae25e13b01d3b4cdc750b5f9e7bad68b150c10",
         "type": "github"
       },
       "original": {
@@ -83,14 +83,15 @@
       "inputs": {
         "nixpkgs": [
           "nixpkgs"
-        ]
+        ],
+        "noctalia-qs": "noctalia-qs"
       },
       "locked": {
-        "lastModified": 1770543184,
+        "lastModified": 1772821410,
-        "narHash": "sha256-2FFYjurrYjCAT6bpN2Fv63G6vDuWybB91uvqBjJfcWE=",
+        "narHash": "sha256-KE3cnl3eKdfoPwo5aTWmb9j2ROPcdaxWCZ9wSt2VDLc=",
         "owner": "noctalia-dev",
         "repo": "noctalia-shell",
-        "rev": "bf1a0f76bb5ca48991d51130022af6bead64d153",
+        "rev": "c685b70f10bc59180e515ccad86a80a671ce80a0",
         "type": "github"
       },
       "original": {
@@ -99,6 +100,27 @@
         "type": "github"
       }
     },
+    "noctalia-qs": {
+      "inputs": {
+        "nixpkgs": [
+          "noctalia",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1772673824,
+        "narHash": "sha256-TLHXPoELZA6VeuzC1Zpx+MnSsYzrJs+DSieMgfjAOJc=",
+        "owner": "noctalia-dev",
+        "repo": "noctalia-qs",
+        "rev": "f8531192cd09b9ea2e78d18e9cfc9d3dba498690",
+        "type": "github"
+      },
+      "original": {
+        "owner": "noctalia-dev",
+        "repo": "noctalia-qs",
+        "type": "github"
+      }
+    },
     "root": {
       "inputs": {
         "home-manager": "home-manager",

flake.nix

@@ -53,6 +53,23 @@
           }
         ];
       };
+
+      argon = nixpkgs.lib.nixosSystem {
+        system = "x86_64-linux";
+        specialArgs = { inherit inputs; };
+        modules = [
+          ./hosts/argon/hardware-configuration.nix
+          ./hosts/argon/configuration.nix
+          home-manager.nixosModules.home-manager
+          {
+            home-manager.extraSpecialArgs = { inherit inputs; };
+            home-manager.users.aaron.imports = [
+              nixvim.homeModules.nixvim
+              ./users/aaron/home.nix
+            ];
+          }
+        ];
+      };
     };
   };
 }

hosts/argon/configuration.nix

@@ -0,0 +1,31 @@
+{ config, pkgs, inputs, ... }:
+
+{
+  imports = [
+    ../../modules/nixos/audio.nix
+    ../../modules/nixos/bootloader.nix
+    ../../modules/nixos/certificates.nix
+    ../../modules/nixos/drives.nix
+    ../../modules/nixos/gnupg.nix
+    ../../modules/nixos/graphics.nix
+    ../../modules/nixos/greetd.nix
+    ../../modules/nixos/locales.nix
+    ../../modules/nixos/networking.nix
+    ../../modules/nixos/niri.nix
+    ../../modules/nixos/noctalia.nix
+    ../../modules/nixos/openssh.nix
+    ../../modules/nixos/packages.nix
+    ../../modules/nixos/protonvpn.nix
+    ../../modules/nixos/services.nix
+    ../../modules/nixos/settings.nix
+    ../../modules/nixos/steam.nix
+    ../../modules/nixos/users.nix
+  ];
+
+  # set hostname
+  networking.hostName = "argon";
+
+  # install state version
+  system.stateVersion = "25.11"; # Don't change
+}
+

hosts/argon/hardware-configuration.nix

@@ -0,0 +1,39 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "nvme" "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
+  boot.initrd.kernelModules = [ "dm-crypt dm-mod" ];
+  boot.initrd.luks.devices."cryptroot".device = "/dev/disk/by-label/nixcrypt";
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/mapper/lvmroot-root";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/AC1C-20EB";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
+    };
+
+  fileSystems."/home" =
+    { device = "/dev/mapper/lvmroot-home";
+      fsType = "ext4";
+    };
+
+  swapDevices =
+    [ { device = "/dev/mapper/lvmroot-swap"; }
+    ];
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/neon/configuration.nix

@@ -5,6 +5,7 @@
     ../../modules/nixos/audio.nix
     ../../modules/nixos/bootloader.nix
     ../../modules/nixos/certificates.nix
+    ../../modules/nixos/docker.nix
     ../../modules/nixos/gnupg.nix
     ../../modules/nixos/locales.nix
     ../../modules/nixos/networking.nix
@@ -19,6 +20,9 @@
     ../../modules/nixos/users.nix
   ];
 
+  # set hostname
+  networking.hostName = "neon";
+
   # install state version
   system.stateVersion = "25.11"; # Don't change
 }

modules/home-manager/ghostty.nix

@@ -7,9 +7,9 @@
       clipboard-paste-protection = false;
       clipboard-read = "allow";
       font-family = "0xProto Nerd Font Mono";
-      font-size = 9;
+      font-size = 12;
       gtk-titlebar = false;
-      scrollback-limit = 10000;
+      scrollback-limit = 100000;
       shell-integration = "zsh";
       theme = "noctalia"; # generated by noctalia-shell
       window-decoration = "auto";

modules/home-manager/shell.nix

@@ -8,7 +8,7 @@
     oh-my-zsh = {
       enable = true;
       theme = "agnoster";
-      #plugins = [ "git" "ssh-agent" ];
+      plugins = [ "git" "ssh-agent" "gpg-agent" ];
     };
   };
 

modules/nixos/docker.nix

@@ -0,0 +1,23 @@
+{ config, lib, pkgs, ...}:
+
+{
+  virtualisation.docker = {
+    enable = true;
+    # Customize Docker daemon settings
+    daemon.settings = {
+      dns = [ "1.1.1.1" "8.8.8.8" ];
+      log-driver = "journald";
+      registry-mirrors = [ "https://mirror.gcr.io" ];
+      storage-driver = "overlay2";
+    };
+    # Use the rootless mode
+    rootless = {
+      enable = true;
+      setSocketVariable = true;
+    };
+    # Install docker-compose
+    extraPackages = with pkgs; [
+      docker-compose
+    ];
+  };
+}

modules/nixos/drives.nix

@@ -0,0 +1,47 @@
+{ config, lib, pkgs, ... }:
+
+# Add encrypted drives to argon
+
+{
+  # copy keyfiles into initrd to make them available during early boot
+  boot.initrd.secrets = {
+    "/etc/nixos/keys/data1.key" = "/etc/nixos/keys/data1.key";
+    "/etc/nixos/keys/data2.key" = "/etc/nixos/keys/data2.key";
+    "/etc/nixos/keys/nvmecache.key" = "/etc/nixos/keys/nvmecache.key";
+  };
+
+  # decrypt data drives with keyfiles for argon
+  boot.initrd.luks.devices = {
+    "data1" = {
+      device = "/dev/disk/by-uuid/dfae62cc-bad1-4879-bf9a-461bde833625";
+      keyFile = "/etc/nixos/keys/data1.key";
+    };
+    "data2" = {
+      device = "/dev/disk/by-uuid/8312edae-9247-481b-a313-52a7f848f027";
+      keyFile = "/etc/nixos/keys/data2.key";
+    };
+    "nvmecache" = {
+      device = "/dev/disk/by-uuid/2352250e-4ebe-4f9a-bf66-0d4aaa961bd8";
+      keyFile = "/etc/nixos/keys/nvmecache.key";
+    };
+  };
+
+  # mount decrypted filesystems
+  fileSystems."/mnt/data1" = {
+    device = "/dev/mapper/data1";
+    fsType = "ext4";
+    options = [ "nofail" ];
+  };
+
+  fileSystems."/mnt/data2" = {
+    device = "/dev/mapper/data2";
+    fsType = "ext4";
+    options = [ "nofail" ];
+  };
+
+  fileSystems."/mnt/nvmecache" = {
+    device = "/dev/mapper/nvmecache";
+    fsType = "ext4";
+    options = [ "nofail" ];
+  };
+}

modules/nixos/graphics.nix

@@ -0,0 +1,17 @@
+{ config, lib, pkgs, ... }:
+
+{
+  # enable amd GPU acceleration (mesa, vulkan, egl)
+  hardware.graphics = {
+    enable = true;
+    enable32Bit = true;
+  };
+
+  # install amdgpu_top
+  environment.systemPackages = with pkgs; [
+    amdgpu_top
+  ];
+  
+  # add amdgpu to the initrd for plymouth
+  hardware.amdgpu.initrd.enable = true;
+}

modules/nixos/greetd.nix

@@ -0,0 +1,14 @@
+{ config, lib, pkgs, ... }:
+
+{
+  # greetd display manager with tuigreet
+  services.greetd = {
+    enable = true;
+    settings = {
+      default_session = {
+        command = "${pkgs.tuigreet}/bin/tuigreet --time --cmd niri-session";
+        user = "greeter";
+      };
+    };
+  };
+}

modules/nixos/networking.nix

@@ -1,9 +1,6 @@
 { config, lib, pkgs, ... }:
 
 {
-  # set hostnname
-  networking.hostName = "neon";
-
   # user networkmanager
   networking.networkmanager.enable = true;
 

modules/nixos/openssh.nix

@@ -5,5 +5,15 @@
   services.openssh = {
     enable = true;
     openFirewall = true;
+    ports = [ 666 ];
+
+    settings = {
+      AuthenticationMethods = "publickey";
+      KbdInteractiveAuthentication = false;
+      MaxAuthTries = 5;
+      PasswordAuthentication = false;
+      PermitRootLogin = "no";
+      X11Forwarding = false;
+    };
   };
 }

modules/nixos/protonvpn.nix

@@ -0,0 +1,9 @@
+{ config, lib, pkgs, ... }:
+
+{
+  networking.firewall.checkReversePath = false;
+  environment.systemPackages = with pkgs; [
+    wireguard-tools
+    protonvpn-gui
+  ];
+}

modules/nixos/users.nix

@@ -5,7 +5,7 @@
   users.users.aaron = {
     isNormalUser = true;
     group = "users";
-    extraGroups = [ "wheel" "networkmanager" ];
+    extraGroups = [ "wheel" "networkmanager" "docker" ];
     shell = pkgs.zsh;
   };
 
@@ -14,10 +14,5 @@
     enable = true;
     enableCompletion = true;
     autosuggestions.enable = true;
-    ohMyZsh = {
-      enable = true;
-      plugins = [ "git" "sudo" ];
-      theme = "gentoo";
-    };
   };
 }